Power Distribution Transformer

We are offering distribution transformer, power distribution transformer, voltage power transformers are manufactured with standard rating & customer requirement, Bharati's Transformer are designed & tested as per IS2026.

Bharti's Transformer are manufactured with standard rating & customer requirement, Bharti's Transformer are designed & tested as per IS2026. Our transformers are durable low capacitive, power saver and highly official.

Product Range of Distribution & Power Transformer:

• High value of coupling capacitance.
• Maximum leakage of magnetic field.
• Leakage current
• Static transformers of electric noise.

• Single Phase / Three Phase
• Indoor | Outdoor
• Pole mounted / Ground Mounted
• Conventional type / Hermetical Fealed type
• Conventional Radiator / Corrugated Radiator
• Copper / Aluminum Wound
• Fitting Accessories as Per Requirement

• Core: Core is made from best grade imported cold rolled grain oriented silicon steel lamination. Laminations are cut at an angle of 45 degree Celsius. Interleaved & mitered joints reduce the core losses & magnetizing current. Core is clamped with steel channel rigidly to reduce the cartile sound level.
• Winding: Windings are designed to optimize dynamic, thermal Mechanical & Electrical strives depending upon the current & voltage requirement. The coils are wound with electrolytic grade high conductivity annealed wire & stripe covered with high quality insulation. Colling ducts are provided between windings & oil to minimize hot spot temperature & temp. gradient.
• Insulation & Oil: Insulation material like pre compressed board, bakelite, tube, insulating top, varnish, epoxy/porcelains bushing etc are used of best quality to ensure long life of transformers. Oil is used as a coolant conforms IS 335 is centrifuged & filtered before filling into the transformer to ensure free from dust & moisture.
• Tanks & Radiator: All tanks are assembled by cold/hot rolled steel plates through welding. They are equipped with radiator corrugated steel sheets in accordance with capacity.
• Paint: Interior & Exterior surface are cleaned by chemical & coated with red oxide & 2 final coat of paint outside of tank body is coated for better & long life.
• Temperature Rise: Designed for maximum temp rise at full rated load, 40-50 degree Celsius for Aluminum wound & 45-55 degree Celsius for copper wound transform.